- Overview
180-Day Long Battery Life :
The rechargeable and removable battery with low power protocol can largely extend your usage time.
Battery life of up to 180 days is based on TP-Link’s laboratory testing triggering 10-20 events per day. Actual battery life may vary based on device settings, use, and environmental factors.
2K QHD Crystal Clear View :Now with 1.7 times more pixels than 1080p, providing clearer videos and more crisp photos.
Full-Color Night Vision :Generates full-color images at night with embedded light.
Starlight Sensor: Captures high-quality images with vivid colors even in low-light conditions.
Smart AI Detection and Notification :Smart AI identifies people, pets, and vehicles, notifying users as needed.
Customizable Detection and Alarms : Record your own audio as an alarm to extend your usages. The ultra-bright and adjustable light is also supported to frighten unwanted visitors away.
Set the Camera On the Table :Set your camera anywhere(Indoor / Outdoor) you want.
Two-Way Audio : Communicate directly with the outdoors
Customizable Activity Zone : See what matters most to you.
Secure Local Storage : Save recorded videos on the hub-installed microSD card (Up to 512GB) or using Tapo Care cloud storage service
Cloud Storage : Tapo Care supported. Enjoy your cloud storage with unlimited spaces.
Water & Dust Resistant – IP65 : Resistant to outdoor weather-related factors. - Specifications :-
CAMERA
Image Sensor:1/3″ Progressive Scan CMOS Starlight Sensor
Lens: Focal Length: 3.2 mm
Aperture: F1.6
Field of View:113° (Diagonal), 97°(Horizontal), 54°(Vertical)
Night Vision:
850 nm IR LED (49 ft / 15 m)
Full-Color Night Vision
Lighting:2× Built-in Spotlights
Hub Compatibility:Compatible with Tapo H200 (Included)
Interface & Button:1× SYNC/RESET ButtonHUB
Device Compatibility:Works with Tapo smart sensors, buttons, Sub-1G switches, cameras, and video doorbells.
All Supported Products>
Connection Capacity:Up to 64 Sub-1G switches, sensors, or buttons + 4 cameras or video doorbells
Interface & Button:
1× Ethernet Port
1× RESET Button
1× SYNC Button
1× MicroSD Card Slot (Up to 512 GB)
VIDEO & AUDIO
Maximum Resolution:2K QHD 4MP (2560 × 1440 px)
Frame Rate:15 fps/20 fps
Digital Zoom:12×
Video Compression:H.264
Live View:Yes
Image Enhancement:
3DNR
WDR
Audio Input & Output: Built-in Microphone and Speaker
Audio Communication:Two-Way Audio with Noise Cancellation
Siren Volume:
Camera:92 dB (Level measured at 4-inch/10-cm distance)
Hub:100 dB (Level measured at 4-inch/10-cm distance)
STORAGE
Local Storage:MicroSD Card Slot on Hub (Up to 512 GB)
General Information about using MicroSD Cards >
Cloud Storage:Tapo Care Cloud Storage Services (Subscription required)
DETECTION and NOTIFICATIONS
Sensor: Single Motion Sensor (FOV: 110° horizontal)
Single Ambient Light Sensors
AI Detection:
Motion Detection
Person Detection
Pet Detection
Vehicle Detection
Activity Zones: Yes
Output Notification :
System Notification
System Notification with Snapshot (Tapo Care Services)
NETWORK
Network Connectivity:Connect via Wi-Fi or Ethernet
Wireless Connectivity:
IEEE 802.11b/g/n, 2.4 GHz Wi-Fi
Sub-1G, 868MHz or 922MHz (Used for local connection between camera and hub)
Ethernet Port:1× 10/100 Mbps RJ45 Port on Hub
SECURITY
128-bit AES Encryption with SSL/TLS WPA/WPA2-PSK
POWER
Power Source:
Hub：9V DC Power Adapter
Camera：6700 mAh Removable Rechargeable Lithium-ion Battery
Optional Solar Panel: Tapo A200 (Sold separately)
Input Voltage:Camera Battery Pack Adapter Input: 100-240 V, 50/60 Hz
Hub Adapter Input: 100-240 V, 50/60 Hz, 0.3 A
Output Voltage:Camera Battery Pack Adapter Output: 5.0 V, 1.0 A
Hub Adapter Output: 9.0 V, 0.85 A
GENERAL
Smart Integration:Google Assistant, Amazon Alexa
Weather Resistance:Camera: IP65
System Requirements :Tapo App: iOS 11.0 or higher, Andriod 5.0 or higher
Mounting Options:
Tabletop
Ceiling-Mounted
Wall-Mounted
Operating Temperature:
Camera: -20℃~45℃
Hub: 0℃~40℃
Storage Temperature:-20℃~60℃
Operating Humidity:10%~90% RH, Non-condensing
Storage Humidity:5%~90% RH, Non-condensing
Charging Temperature:0-55℃
Dimensions ( W x D x H ):
Camera Dimensions: 4.35 × 2.52 × 2.52 in (110.6 × 64.2 × 64.2 mm)
Hub Dimensions: 2.8 × 2.8 × 1.2 in (71.45 × 71.45 × 31.25 mm)
Weight :
Camera Weight: 5.88 oz / 166.74 g
Hub Weight: 2.54 oz / 71.9 g
Package Content:
Tapo C420 Camera
Tapo A100 Battery
Tapo H200 Hub
USB Adapter
USB Adapter Cable
DC Power Adapter
Mounting Anchors
Mounting Screws
Mounting Template
Camera Bracket
Quick Start Guide
RJ45 Ethernet Cable
Certifications: CE, FCC, RoHS, RCM
